Search the Community
Showing results for tags 'iron'.
-
Hello, Found this on a beach in Algarve, Portugal. It looked like a piece of rust, and it was a little magnetic. With pliers, I broke the rust, and inside there was a metallic, hook-shaped object. What can it be? How old could it be? Thanks
-
- 2 replies
-
- tree fossil
- stigmaria
-
(and 3 more)
Tagged with:
-
Bought this on online auction site recently from a Japanese seller. Its a "viewing stone". Apologies if this is not a fossil. I am a novice. I've done quite a few hours of research, but have decided that I just don't have the experience needed to make an identification. No matter how may pictures I look at and for how long..... I haven't received it yet. It seems to have a hole in the top and one hole on the side. Am not sure if its hollow or if the holes are shallow. The pictures are dark...apologies again. If needed, I will post better pictures when I have it in my hands. Or maybe maybe its obvious what it is, at a glance...to an experienced eye. I've compared it to slag, fossils, even meteorites (extremely unlikely). Any help appreciated. Thanks!
-
Just finished up this 2nd Priscacara prep job from 18" layer. I'm noticing each fish is its own beast, some are in softer stuff and some harder. Did this one between 20 and 30 psi. I keep getting fish that seem to have damage to the tail before they are buried. Also picked up a 12v electromagnet on Amazon. Works great for collecting the iron powder. Click it on, collect, click it off.
- 6 replies
-
- 6
-
- priscacara
- prep
-
(and 1 more)
Tagged with:
-
This was a topic of discussion a few times in other threads. I had a small split layer fish I could sacrifice so I gave it a shot with iron powder at low psi. Seems to have worked well. I initially started around 8-10 psi but this was too high. Seems to work well around 5-7 psi. For the harder 18" stuff 30-40 works well. Cheers
-
Hello! I found this rock in the desert in Saudi Arabia, it felt heavy and I measured its density to be 2.9 g/cm3. I also cut it on the edge and appeared to be iron or some metal but it doesn’t stick to a magnet. what is it?
-
Found this in the Coleraine formation of northern Minnesota, it appears to be bone, possibly a part of an arm or leg, any guesses to what it may be? (I’ve already contacted a paleontologist but I thought I’d ask here, too. Also any tips of removing iron off of fossils? Many of the fossils here are within iron stones and i don’t know how to safely remove most of it.)
- 14 replies
-
- coleraine formation
- minnesota
-
(and 3 more)
Tagged with:
-
3/3 found these on shore of Lake Diefenbaker in Saskatchewan, Canada. looked to be eroded from sandy deposits with layers of harder iron-rich rusty strata. the fossils themselves are heavy, mineralized with iron and then rusted? corals? all the same type or different? i think this is in cretaceous age but not sure. see other 2 posts these samples are really interesting, found in situ, on exposed section of eroding sandy beach cliff - see photos, sand with layers of iron rich strata but these bubble textured rusty iron “tubes” all over, connected and running for long distances verticle and horizontal (car key for scale)- i thought maybe looked like root suckers or corals or burrows (photos 1-3) very interesting bubble-texture and hollow ~ 1cm diameter (photos 4-9)
- 6 replies
-
- saskatchewan permit
- coral?
-
(and 2 more)
Tagged with:
-
2/3 found these on shore of Lake Diefenbaker in Saskatchewan, Canada. looked to be eroded from sandy deposits with layers of harder iron-rich rusty strata. the fossils themselves are heavy, mineralized with iron and then rusted? corals? all the same type or different? i think this is in cretaceous age but not sure. see other 2 posts these specimens are larger, very heavy. like solid iron, looks like outer textured surface mineralized and inner cavity separate - looks like central tubular structure did not mineralized (still sandy) in one pic (could scrape out with toothpick)
- 2 replies
-
- saskatchewan
- coral?
-
(and 2 more)
Tagged with:
-
1/3 found these on shore of Lake Diefenbaker in Saskatchewan, Canada. looked to be eroded from sandy deposits with layers of harder iron-rich rusty strata. the fossils themselves are heavy, mineralized with iron and then rusted? corals? all the same type or different? i think this is in cretaceous age but not sure. see other 2 posts
-
I am glad I found this forum. I've always been interested about the origins of rocks. Always amazed how something can be turned into stone given time and pressure. Note my most recent find. This odd shaped stone was unlike any others in the stream and was found in New York State, in Hudson Valley, in the Shawangunk Kill. I took it home (really heavy) and pressure washed it. The side that was down is grey and the topside was green. I assumed the green is algae growth but also thought the pressure wash would take it off. The color seems to be embedded. Likley due to the seemingly porous nature of the grey areas. I am pretty sure the gray part is clay of some sort turned into stone. I was curious about the ironlike outcrops. Could that be parts of trees, limbs or branches that have also turned to stone? Thank you for helping me to identify. ps How did I do on the photos?
-
-
Manganese and Iron Dendrites
oilshale posted a fossil in *Pseudofossils ( Inorganic objects , markings, or impressions that resemble fossils.)
Dendrites are moss- or tree-like pseudofossils on the margins of rock fissures and fossils, usually on the bedding surfaces of platy limestones and sandstones. Mineral-rich water with high concentrations of iron and manganese has penetrated microscopic cavities between limestone layers, and diffusion-limited growth has created these brown iron and black manganese dendrites, which are often mistaken for fossil ferns or fossil moss.. This slab with manganese and iron dendrites comes from the lithographic limestones of Solnhofen. -
I saw this potential fossil in the Jurassic age Navajo Sandstone in Zion National Park in Utah. I'm sorry that there is only one picture with no scale. I was hurrying down the precarious Angel's Landing trail with a long line of people behind me, so I only had time for a quick picture. The feature is probably about ~12 inches long, and I believe that it is situated on the plane of a cross-bed in a dune structure (example of the cross-bedded sandstone is also pictured). This feature might just be some sort of iron precipitation, but it looked so similar to an invertebrate trace fossil that I am not sure. Any thoughts on what it could be?
-
PA fossil rock ID, very heavy, found near Devonian fossils
LindsayWilson posted a topic in Fossil ID
I found this in our backyard in a rock pile. I find many Devonian fossils in the shale lined creeks around Erie, PA. This rock appears to be similar but is extremely heavy and different colored. I can make out fossils but don’t recognize some of the imprints abs it appears folded and is SUPER heavy. For comparison, the rock I found with it, also pictured here is about 3-4x the size but the smaller one weighs 3x as much. No magnetism, but has a burnt spot. Was it perhaps originally a large piece of the lighter fossil plate that someone burned (possibly in a fire pit?) and that is how it appears metamorphic and significantly heavier or more dense? does not look like a meteor...no shiny smooth surface, etc.... any ideas?- 2 replies
-
- pennsylvania
- devonian
-
(and 6 more)
Tagged with:
-
San Antonio, Tx 78023 I have this rock from my yard that looks like it’s covered in iron and something else, but below that it looks like it’s been burned.
- 2 replies
-
- rock
- calcification
-
(and 3 more)
Tagged with:
-
Still learning my formations. Found these close to the bottom of the Dakota Sandstone formation in Kansas.
- 3 replies
-
- dakota sandstone
- kansas
-
(and 7 more)
Tagged with:
-
I’m only posting these because of the similarities in the 2 pieces. Very heavy iron material found in same creek in Arkansas near the Missouri border. Soon to be added to my rock garden.
- 2 replies
-
- crowleys ridge
- northeast arkansas
-
(and 1 more)
Tagged with:
-
Below are 2 items found on the same day after a few days of heavy rain/high creek water. Both of these are heavy and have a hard iron-like shell or covering. The 2nd item was split into 2 pieces when I found it. It is made of the same material as the first. We have iron in our well water at the base of the ridge so I’m very familiar with the color and the smell of iron. These items don’t usually wash up in the creek. I picked them up because their unusual shape and texture contrasted with the creek’s normal sand and gravel.
- 5 replies
-
- arkansas
- crowleys ridge
-
(and 1 more)
Tagged with:
-
Chemical Erosion can sometimes be quite artistic
Ludwigia posted a topic in General Fossil Discussion
Last week I visited a new site in the Wutach Valley that a friend had told me about, but after 4 hours of digging and prying and not much to show for it, I decided to call it a day there and spend the remaining few hours checking out a plowed field in the viscinity which usually gave up a few modest finds. But this time I was in luck. The farmer had laid a long furrow on the edge of the field which was exposing a fossiliferously fruitful bed with which I was quite familiar: the Bajocian Macrocephalen-Oolite with among other things lots of Macrocephalites ammonites ripe for the harvest. All I had to do was a bit of hacking and scratching at the surface to get the blocks out. And I wasn't doing any damage to his fields. The only drawback about field finds is that the fossils are often quite weathered and eroded. The acids in the humus react with the ground water and the substances in the fossils, in this case mostly iron and calcite, and eat away at them. In this case it wasn't so bad, though. Quite to the contrary, some really nice sculptures were a result of its work. The chemical reactions over the years have etched out the lobes and septa of the ammonites, creating some really distinctive and colorful patterns. Here's a typical example of a Macrocephalites jacquoti ammonite in this condition. If anyone else would like to show some results of the working of chemical erosion, then please feel free to do so.- 10 replies
-
- 15
-
While rockhounding in the area of the Niagara Penninsula, I found an odd-shaped piece of metal about 5 inches beneath very thick, wet mud. The place in which I found the object was in a very shallow stream, which ran over sedimentary rock of the pre-Cambrian shield. After a closer inspection at home, I believe I may have found an iron-mineralized piece of a petrified wood, intertwined with two separate vines. A friend suggested it may be a rusty drill bit although I have doubts based on the location it was found. It is 3 1/2" long and 3/4" wide. It is heavy and seems hard like a metal. It is somewhat magnetic. It appears mostly brown, with spots of orange, and some light brown mud residue. I am assuming the vibrant orange colour is rust although there are also pale-orange spots which resemble the interior of a stick. Before cleaning the specimen, I would appreciate any opinions/advice. I am only able to attach two photos, but I will upload the rest in the response section. Any help is much appreciated!
-
Found this on the beach the other day along Puget Sound north of Seattle, and I just polished one face a bit (first photo) with some sandpaper to see the un-weathered stone. Is this siltstone, petrified wood, something else? Has anyone seen one with iron like this? Edit: I sanded it some more and took another photo. Pretty sure this is wood, based on the grain, but I'm no expert!
- 8 replies
-
- petrified wood
- iron
-
(and 1 more)
Tagged with:
-
NEED HELP!!! Is This Just an Iron Concretion or A Preserved Fossil?
Kurufossils posted a topic in Fossil ID
Hello everyone, I am in desperate need of help with a huge debate I have been having with a friend over fossils preserved in ironstone concretions. From some of what I had read to some advice from other members I it possible to find vertebrate bone among shells and other mollusks preserved in an ironstone concretion. Whether it leaves a trace of the organism, morphs the organic material into the structure of the iron concretion through the decomposition with preserving, or whatever else it may be it seems to be possible. So recently I have hunted a place known to have recorded marine cretaceous shell and other mollusk found in ironstone concretion as well as cretaceous plants in shale, it seems like not to vast of enough study has been done there only from what I know, but since no vertebrate material had yet been discovered there though there can maybe be the possibility. I found these two particularly distinct pieces in iron concretions that exactly mimic the scute structure of soft shell turtle and croc in my opinion, I know how iron concretions are famous for leaving psuedofossils and such but these two pieces look way to exact and since its possible for shells and mollusks to preserve why not scutes? So I am here looking to end this debate, I'm looking for your opinion, can these be labeled as fossils, traces, etc? Or are these among some of the world's best iron concretions and nothing more. Your input especially if you are very experience in this subject would be tremendously appreciated.