Search the Community
Showing results for tags 'vertebra'.
-
I'm trying to help someone ID this vertebra found in Gloucester, UK a few years ago. It's from a Jurassic site and I'm pretty sure it's a theropod vertebra but was wondering if anyone on the forum could help out? I have a theropod tooth from the same place which I might post soon in the hope of narrowing down an ID too. Thanks in advance!
-
Hello, I'm more hopeful about this one. It looks different than the other verts that are for sale which are usually misidentified plesiosaur/pliosaur verts. Plus, while it has a couple of holes at the bottom--they are nowhere near as distinct as others. It is from Abingdon, Kimmeridge Clay. Dimensions are 6.5 x 5 x 7 Now, I haven't seen Sauropod verts listed for sale which are this shape--which half makes me think it's something else entirely. But, then again, most sauropod verts from the UK are misidentified so I can't really judge with others listed for sale. Anyway, thanks for taking a look.
-
Hello, I found this vertebra on the beach this morning in Charleston, SC and was hoping someone could help ID it. My initial guess was a dolphin vertebra? Thanks in advance!
- 2 replies
-
- charleston
- south carolina
-
(and 1 more)
Tagged with:
-
Hello! I'm new to the forum and while I have been interested in fossils since I was young I didn't really start collecting more seriously until recent years so I'm still a complete novice. I received this vertebrae in a trade so I'm not sure where it's from but it's approximately 8cm at the widest point. I took some of the images with the measuring tape in the picture but it only shows inches. I posted these on facebook and someone was kind enough to help me identify another piece but nobody has had said anything about this one yet. Any assistance is appreciated! Thank you so much! Ok...I have a bunch of good images and I can't seem to upload them because they're apparently too large, lol. Hopefully, I can get this to work. Fingers crossed! Let me know if you can't see them, I'm completely new to the forum.
-
It's been nearly two years since last I posted, but I'm back with one of my latest creations, a lifesize replica of a bone from Titanoboa cerrejonensis. The smaller bone next to it is a vertebra from a(n estimated) 10-12-foot anaconda which I used for reference. Enjoy!
-
Ornithischian vertebra - Lance Fm. Thescelosaurus? Hadrosaur?
Opabinia Blues posted a topic in Fossil ID
Hello! This is a very worn, very eroded ornithischian vertebra from the Lance Formation of Wyoming. It was in three pieces that I recently glued back together, I found all the pieces wrapped in foil together in the box I brought back from the trip. It’s from my trip there this summer, though I don’t remember collecting this specific bone. My immediate thought based on size and shape is Thescelosaurus, though I have seen some small Hadrosaur verts that look kind of like this one. I just hope it isn’t too worn/eroded that no guesses at an ID can be made! Thanks!- 2 replies
-
- id
- lance formation
-
(and 3 more)
Tagged with:
-
Hi all, Something different for today. I discovered this vertebra in the surf at Matoaka Cabins roughly 2 years ago. For those of you that don’t know, the rocks here are Miocene in age and preserve a nearshore marine environment. Cetacean remains are common, but other mammals (esp terrestrial) are not. Originally I thought it was a turtle vert, but now I’ve realized that it’s mammalian and possibly terrestrial in origin. It passed the burn test, by the way. My thought is that it is from a small mammal’s tail, as it closely resembles other mammalian caudal vertebrae. I’ve included a diagram of the vertebrae of Phenacodus, which show marked similarity. It’s not from Phenacodus, though as the deposits are far too young. Does anyone have any ideas on a better or more specific id? I’m not well versed in Cenozoic mammals. Thanks in advance.
- 8 replies
-
- calvert cliffs
- caudal
- (and 4 more)
-
Hi, I'd quite like this. Advertised as an unidentified theropod vert from Portugal (Lorinha formation). 5.3 cm x 5.2 x 4.5 cm. Is it theropod as opposed to croc or other dinosaur? Any thoughts would be great. Thanks
-
Hi, I am interested in this. Sold here, seller says its ok to have a second pair of eyes look it over. From Holzmaden. Slab is 50cm. Jaw is 14cm. Seller thinks jaw has been added. My main concern is have the vertebra been added too? Thanks
- 16 replies
-
- ichthyosaur
- tail
-
(and 1 more)
Tagged with:
-
Braved the cold today to have a long walk around Runswick Bay and beyond. Best find was this vertebra, found in a slab of ammonites. Needs a little more prep to get the shale off. Any idea if it’s Ichthyosaur or something else?
- 13 replies
-
- ichthyosaur
- jurassic
-
(and 2 more)
Tagged with:
-
From the album: Fossil Collection
-
Hello! I got this dinosaur vertebra from Hell Creek (Montana) a few years back. It was sold to me as a Triceratops vertebra but I don't know how that ID was made. It's not in the best condition (has moss(?) on it and has been broken and then glued back together) but it is about 13-14 centimetres across so it is clearly from a big dinosaur, but there were plenty of those in Hell Creek (even two large ceratopsids - Triceratops and Torosaurus). Looking for any insight into how an ID could be made here and if Triceratops (or even just ceratopsid) is correct
- 4 replies
-
- cretaceous
- dinosaur
-
(and 4 more)
Tagged with:
-
I found these two vertebrae nearby each other in the Dinosaur Park Formation. I originally thought it might be Champsosaur, but after closer examination I ruled that out. I then thought salamander, but the neural canal on mine is too small. Finally, I thought it might be a lizard (like Paleosaniwa), but the vert itself is more slender then a lizard vert. So, I’m out of ideas. I’m wondering if it may be from a juvenile theropod, but I really can’t tell. Any help would be appreciated. Thanks! *should note on the vert with the majority of the process preserved that the articulate surface on one side is noticeably convex.
-
- cretaceous
- dinosaur park formation
-
(and 2 more)
Tagged with:
-
Massive longshot with this one because I literally have no info other than it being a dinosaur vert. The seller bought a bunch of antiques and collectables and this was included listed as just "dinosaur vertebra". Some of the other fossils he has listed are clearly Moroccan--Mosasaur, Onchopristis etc, but this one definitely doesn't look Moroccan to me. SO, getting an ID is a massive longshot, but perhaps someone can recognize it and narrow it down a bit. I messaged seller for more info, but ... that's it unfortunately.
-
Hello! I have a Ichtyosaur vertebra from Abingdon, Oxfordshire. It says it's Kimmeridgian. what Im wondering is if there are many types of ichtyosaurs that has been found in that region or if remains from these can be narrowed down to a specific species?
- 3 replies
-
- ichtyosaur
- species
-
(and 2 more)
Tagged with:
-
My daughter found this vertebra on the beach today while we were looking for shark teeth (at Mikler Beach, just north of St Augustine). Any ideas on a more specific attribution? Thanks!
-
Went hunting yesterday. Gorgeous day. Fast currents, deep water that is forecast to get deeper and faster by Monday. Mostly small , broken shark teeth, but there were 4 that were fun to find. A partial Sloth tooth, heavily worn at the chewing surface. I am thinking Harlan's. I found it in the 2nd sieve , which kept me at that location for the next 6 hours. Note the heavy wear on the left side of the chewing surface. A couple of hours later, I just noted a nice Equus canine on the edge of the screen and grabbed it before it slid back into the depths. The lack of river wear on the tooth makes this one on my finer examples. For a little while, I was finding some geologic material that glinted back at me. It seemed calcified, and could have been coral or sand concretions. L 34, W 27, H 22 mm, Comments appreciated. Finally, the target of this thread. This is only the 3rd or 4th of this type of vertebra that I have found, the others being smaller and more water worn. Convex/Concave ends, lots of fine lines, no obvious processes, L 25, W 23, H 18 mm zz
- 15 replies
-
- 3
-
- peaceriver
- pleistocene
-
(and 1 more)
Tagged with:
-
Location: South Texas Estimated Age: Pleistocene Matrix: Sand, low water, gravel I found this vertebra in the riverbed yesterday and could use help identifying it, if possible. I found this link, which made me think it was possibly a turtle vertebra, since it looks like the front is convex and the back is concave. It's a pretty large vertebra, so my turtle guess may be completely off, unless this is another hesperotestudo piece. Thanks for any help or suggestions! --Brandy
- 4 replies
-
- 2
-
- pleistocene
- texas
-
(and 2 more)
Tagged with:
-
Howdy! Took a quick trip up to Dallas last week (kitten transport to two lucky families!) and I got a little fossil hunting in as well. The creek was Woodbine Form. Found this partial vertebra and was thinking it was mosasaur (FINALLY FOUND ONE! even if it is pretty banged up) but a friend says maybe not? Any thoughts? And also found this lovely little shark vert. Any way of telling what kind? (I think it's a shark vert, anyways. I might be wrong...lemme know!) Measurement in Inches
-
Hello all. I found this vertebra on the beach in Jersey City on New York Bay. Unfortunately I highly doubt it’s fossil. 2.5 inches tall by 2 inches wide. Obviously not fish. I am hoping it’s a marine mammal but suspect it might be dog. Thank you
- 4 replies
-
- new jersey
- new york bay
-
(and 1 more)
Tagged with:
-
Hey there! New user, and probably not likely to stick around for long if I'm honest. I've just never had much of an affinity for forums, I'm afraid. That said, I have been absorbed by this particular specimen for several decades. The only suggestion I've heard so far is some kind of whale, but I was curious if I could narrow it down a bit more. Also, I'm not an expert, but it seems pretty different from most whale vertebrae I've looked up. That said, there are a lot of bones in a lot of kinds of whales out there, so I could easily, easily be wrong in my skepticism. This was found on a beach in southeastern North Carolina, it is approximately 7 cm long, nearly 11 cm across, and almost 9 cm in height, for reference, in case the ruler is tough to read. View from behind: View from above: View from the front (and upside down): View from the side: I appreciate any help or information anyone can offer, and if nothing else, I hope you guys get some enjoyment from the puzzle! Let me know if I did anything wrong or if you need more info and I'll see what I can scrounge up to help you out. Cheers!
- 1 reply
-
- north carolina
- vertebra
-
(and 1 more)
Tagged with:
-
Hello everyone, I just bought a caudal vertebra of a diplodocus. It is from Wyoming and quite impressive in terms of size. I have no idea if such pieces could be faked... thanks a lot for your feedbacks
- 6 replies
-
- 1
-
- caudal
- diplodocus
-
(and 2 more)
Tagged with:
-
I was out yesterday doing a final hunt before the snow sets in here in Montana on the Judith River formation and found this claw along with this vertebra, no other bones around so possibly from the same animal. I have found theropod claws that are much smaller and this one is huge when compared. I searched for the tip but sadly couldn't find it. I assume because of the size it would be a tyrannosauroid but not certain. Can it be determined to be a toe claw or hand claw? Is the vertebra identifiable? @patrickhudson
- 12 replies
-
- 4
-
- dinosaur bones
- t-rex claw
- (and 5 more)
-
Hi! I have a couple of bones that I would love some help with. The first appears to be a metacarpal perhaps (?), about 2.5" long - of unknown origin. I received it in two pieces, with a bit of the surrounding matrix still intact. The matrix is rust-colored & grainy, almost similar to what you might find on a Spino tooth; although the fossil itself isn't colored like any spino specimen I've encountered, plus its a pretty small bone. Any thoughts on what it might be? Secondly, is a vertibra, perhaps caudal (?). Very small, roughly an inch squared. My assumption is that it is mammalian in origin. It's color is reminiscent of various bear, lion & canine examples I've worked with, but I would differ to the more knowledgable minds here. Any insight would be appreciated. Thank you in advance!
- 12 replies
-
- dinosaur
- fossil prep
-
(and 1 more)
Tagged with: