Searcher78 Posted April 2, 2020 Share Posted April 2, 2020 Since I’m in lockdown, I’m going through old teeth. One small tooth in my Flag Pond, MD box had me stumped. I’m now leaning toward a small Galeocerno contortus. It is all black and hard to get a good picture. 2 Link to comment Share on other sites More sharing options...
hokietech96 Posted April 2, 2020 Share Posted April 2, 2020 It looks like it. There should be serrations on the distal shoulder I believe. Tooth so black I can’t tell 1 Link to comment Share on other sites More sharing options...
Peto Lithos Posted April 2, 2020 Share Posted April 2, 2020 A head-on photo would help, but from what I can see that looks correct as well. 1 Link to comment Share on other sites More sharing options...
digit Posted April 2, 2020 Share Posted April 2, 2020 11 hours ago, Searcher78 said: It is all black and hard to get a good picture. Here's a tip for black teeth photography--don't photograph on a white background. most of the fossil shark teeth (and other fossils for that matter) are various shades of gray to black here in Florida as well. Cameras try to adjust to get an even exposure when looking at the sum of the entire area seen by the lens. The very high contrast of the bright white forces the camera's exposure system to under expose the black tooth losing much of the detail. I picked up some gray "construction paper" (basically thicker card stock) from one of the art and hobby stores (they use it for scrapbooking and the like). You can also probably find some wherever they sell school supplies for younger kids. By using a medium to darker gray background the camera can brighten the overall image resulting in better detail and less shadows. Cheers. -Ken 6 Link to comment Share on other sites More sharing options...
minnbuckeye Posted April 2, 2020 Share Posted April 2, 2020 2 minutes ago, digit said: By using a medium to darker gray background the camera can brighten the overall image resulting in better detail and less shadows. Great tip! I always shoot teeth on a white background. Link to comment Share on other sites More sharing options...
digit Posted April 2, 2020 Share Posted April 2, 2020 That's the natural inclination to provide a featureless background. Many scientific papers (digitally) cut out photographed specimens and place them on a white background in figures. Best to do that in post-editing and not actually while shooting dark subjects. Using a neutral (grayscale) background is important in that it helps the camera find a proper color balance. If the lighting imparts a cast (cooler blue or warmer red tones) photo editing software can restore a proper color balance using the gray of the background as a neutral color reference. I use gray card stock that has a lot of texture (fibers) in it as it helps in focusing. If I were shooting for a scientific paper where I wanted to digitally "subtract" the background leaving only the photographed item, I'd likely use a smoother gray background. BTW: The tooth in the original posting does resemble a Galeocerdo contortus but at first the lack of detail made it look like a symphyseal Carcharius taurus which are very narrow teeth with the curve perpendicular to the tiger sharks. The lack of detail (shadowed) in the middle image of three above is what makes it resemble this symphyseal tooth. I think the detail of the root in the first image makes me lean toward the Galeocerdo. Cheers. -Ken 2 Link to comment Share on other sites More sharing options...
Searcher78 Posted April 2, 2020 Author Share Posted April 2, 2020 8 hours ago, digit said: That's the natural inclination to provide a featureless background. Many scientific papers (digitally) cut out photographed specimens and place them on a white background in figures. Best to do that in post-editing and not actually while shooting dark subjects. Using a neutral (grayscale) background is important in that it helps the camera find a proper color balance. If the lighting imparts a cast (cooler blue or warmer red tones) photo editing software can restore a proper color balance using the gray of the background as a neutral color reference. I use gray card stock that has a lot of texture (fibers) in it as it helps in focusing. If I were shooting for a scientific paper where I wanted to digitally "subtract" the background leaving only the photographed item, I'd likely use a smoother gray background. BTW: The tooth in the original posting does resemble a Galeocerdo contortus but at first the lack of detail made it look like a symphyseal Carcharius taurus which are very narrow teeth with the curve perpendicular to the tiger sharks. The lack of detail (shadowed) in the middle image of three above is what makes it resemble this symphyseal tooth. I think the detail of the root in the first image makes me lean toward the Galeocerdo. Cheers. -Ken Thanks for the tips. I will have to try it. Link to comment Share on other sites More sharing options...
Searcher78 Posted April 2, 2020 Author Share Posted April 2, 2020 Using a gray background. I also use a microscope which is not the easiest to get the best photos. Here are a few angles. 1 Link to comment Share on other sites More sharing options...
digit Posted April 2, 2020 Share Posted April 2, 2020 Disregard what I was saying before about Carcharias taurus (Sand Tiger) symphyseals--I was thinking about Hemipristis serra symphyseals which are very narrow and resemble the first of four images above when viewed from the side. Your tooth does indeed seem to be Physogaleus contortus. How big is it that you have to photograph it with a scope? Here's an interesting reference showing both Physogaleus teeth and the Hemipristis of which I speak. You'll see the upper and lower symphyseals for this species (11&12 and 15&16) in the figure do resemble your tooth (29&30) when viewed from the side. https://www.researchgate.net/figure/Carcharhiniformes-I-Hemipristis-Galeocerdo-and-Physogaleus-from-the-Chucunaque_fig12_316052378 Cheers. -Ken Link to comment Share on other sites More sharing options...
Searcher78 Posted April 2, 2020 Author Share Posted April 2, 2020 40 minutes ago, digit said: Disregard what I was saying before about Carcharias taurus (Sand Tiger) symphyseals--I was thinking about Hemipristis serra symphyseals which are very narrow and resemble the first of four images above when viewed from the side. Your tooth does indeed seem to be Physogaleus contortus. How big is it that you have to photograph it with a scope? Here's an interesting reference showing both Physogaleus teeth and the Hemipristis of which I speak. You'll see the upper and lower symphyseals for this species (11&12 and 15&16) in the figure do resemble your tooth (29&30) when viewed from the side. https://www.researchgate.net/figure/Carcharhiniformes-I-Hemipristis-Galeocerdo-and-Physogaleus-from-the-Chucunaque_fig12_316052378 Cheers. -Ken It was small (5 mm) like the sharp nose shark teeth I found. Link to comment Share on other sites More sharing options...
digit Posted April 2, 2020 Share Posted April 2, 2020 If it's the size of the Rhizoprionodon teeth then it is from a really small Physogaleus. Nice find. That's the size of my largest Cookiecutter Shark (Isistius triangulus) teeth. Cheers. -Ken Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now