aplomado Posted September 19, 2017 Share Posted September 19, 2017 Harry Pristis pointed me to this method, so I thought I would show how it worked out. This only works with fossil that are fairly rectangular or square. A little deviation is okay, depending on what frame you choose. I used Nielsen sectional aluminum picture frames. https://www.nielsen-design.de/en-EN/products/frame-mouldings-aluminium/ They come in a wide variety of colors and styles. When I bought a frame, I told them the exact size of the slab, and they added a tiny bit when they cut it, so the slab would fit inside. So, check with the seller to see if you are ordering the exact size of the slab, or if you need to add a little length yourself so the frame sits inside. I recommend using a carpenters' square when measuring, it made it a lot easier. You need to make sure the frame you are ordering has enough overhang to cover up any potential gap between the slab and the frame. I chose the N95 frame which has about a 1/3 inch overhang. There are frames with an overhang closer to 1/2 inch if you have an irregular slab. You need to make sure the frame you get is deep enough for the thickness of the slab you get. The N95 frame is about 1" deep. Here is what the N95 frame looks like: There are steel angle brackets you use to screw the frame together; here is one of mine seen from the back: You add steel spring clips to press the slab against the front of the frame; I did not use glass: Now, you can use wire to hang the picture; I decided to use the nielsen security hanging system instead; this locks the picture against the wall. It can only be removed with a special tool. So, if someone bumps against it, it won't fall and shatter (or be stolen). They cost me about $4.25 for one set. HOWEVER, I will say removing them with the tool is really annoying, so if you use these I hope you won't need to take them off for a long time. Here are the brackets for my small one installed; it has one hanger up top, and the "lock" below. On my larger slab, I used two hanging brackets up top. So, here are how they look finished: I know we aren't supposed to post retailer's names here; if you want to know where I ordered the frames, send me a PM. These can be ordered at a lot of places online though. The prices for the small frame and all associated hardware, including the locking hangers was $15.30. The price for the larger frame and all associated hardware including locking hangers was $20.46. Shipping was $11.65. So far, I am very pleased with this method, and would like to use it again. Thanks to Harry for the tip! 4 Link to comment Share on other sites More sharing options...
Harry Pristis Posted September 19, 2017 Share Posted September 19, 2017 Good job in sharing your project! These fossils look very nice. Unless the hardware is generic, I believe that this is the same frame and hanger system that I used. What a good investment you've made! http://pristis.wix.com/the-demijohn-page What seest thou else In the dark backward and abysm of time? ---Shakespeare, The Tempest Link to comment Share on other sites More sharing options...
ynot Posted September 20, 2017 Share Posted September 20, 2017 Those look real good! Thanks for the tutorial. Darwin said: " Man sprang from monkeys." Will Rogers said: " Some of them didn't spring far enough." My Fossil collection - My Mineral collection My favorite thread on TFF. Link to comment Share on other sites More sharing options...
Ropterus Posted September 20, 2017 Share Posted September 20, 2017 Great job! Thanks for sharing! Link to comment Share on other sites More sharing options...
LordTrilobite Posted September 20, 2017 Share Posted September 20, 2017 I did something similar recently with my recent horseshoe crab. But I didn't think of using such steel springs, that's actually a really great idea to keep things nicely in place. For my horseshoe crab I used foamcore in the back to keep the specimen in place. Olof Moleman AKA Lord Trilobite Link to comment Share on other sites More sharing options...
aplomado Posted September 20, 2017 Author Share Posted September 20, 2017 The steel springs came with the hardware package. Link to comment Share on other sites More sharing options...
JohnBrewer Posted September 20, 2017 Share Posted September 20, 2017 Great tutorial. John Map of UK fossil sites Link to comment Share on other sites More sharing options...
aplomado Posted September 20, 2017 Author Share Posted September 20, 2017 Ok, the neilson security hangers are annoying; my keisoucarus goes on and off ok, but my fish appears to be stuck to the wall! I think the man who installed it didn't tighten it up enough. Hopefully, I will figure it out eventually! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now