AlaskaNick Posted February 26, 2018 Share Posted February 26, 2018 I wasn't sure where to post this thread, but I have a few fossils that I'd like to either buy or build stands for. I have seen lots of display stands (looks like a wire frame and a metal base) for carch teeth, and mosasaur teeth- that's what I'm looking for but I cant seem to find any for sale on the internet! Not interested in the little plastic megalodon stands, I'm looking specifically for a small wire frame stand where the tooth is held in place by its natural taper. Looking specifically for spinosaurus, carch, and mosasaur tooth stands. Any help would be greatly appreciated, thank you! N Link to comment Share on other sites More sharing options...
Sagebrush Steve Posted February 26, 2018 Share Posted February 26, 2018 Are you handy with a saw? Several posts on this forum show what people have made on their own. Here are a couple of examples: 3 Link to comment Share on other sites More sharing options...
LordTrilobite Posted February 26, 2018 Share Posted February 26, 2018 Personally I'm a big fan of using a small clear acrylic glass round base to place teeth on. It just serves as a transparent foot, nice and subtle. And I use blu tack to attach the tooth to the acrylic base. Though I'm not sure where you'd find them for sale over where you are. 6 Olof Moleman AKA Lord Trilobite Link to comment Share on other sites More sharing options...
Troodon Posted February 26, 2018 Share Posted February 26, 2018 I think the best protection for teeth is a riker box or floating frame like one shown below. I've never seen wire frame stands made for teeth they are usually wood or plastic. Here is a company that makes armature holders and you customize it to your tooth, not cheap however and do not recommend this method. http://www.artdisplay.com/t-arm.html Come in a variety of sizes and inexpensive 3 Link to comment Share on other sites More sharing options...
fossilnut Posted February 26, 2018 Share Posted February 26, 2018 I am interested in the floating frame. I could not find it in the provided link-maybe just me or? troodon can you clarify? Thanks Link to comment Share on other sites More sharing options...
Troodon Posted February 26, 2018 Share Posted February 26, 2018 50 minutes ago, fossilnut said: I am interested in the floating frame. I could not find it in the provided link-maybe just me or? troodon can you clarify? Thanks Good cost effective place to buy them is direct from China which is the way I have done several times. There are lots of offerings on eBay look under. "Plastic Clear Jewelry Suspended Coins Floating Display Case Stand Holder" Delivery always much faster than advertised Link to comment Share on other sites More sharing options...
fossilnut Posted February 27, 2018 Share Posted February 27, 2018 Thanks for the information. Link to comment Share on other sites More sharing options...
Ptychodus04 Posted February 27, 2018 Share Posted February 27, 2018 Do you have access to an oxy-acetylene torch? I made some stands for some ammonites this weekend. Angle iron and steel rod from Home Depot. I simply brazed them together, bent with pliers, and painted black. The options are only limited by your imagination (and maybe your welding skills). 6 Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
aplomado Posted February 27, 2018 Share Posted February 27, 2018 Ptychodus04, that looks fantastic! Link to comment Share on other sites More sharing options...
Ptychodus04 Posted February 27, 2018 Share Posted February 27, 2018 43 minutes ago, aplomado said: Ptychodus04, that looks fantastic! Thanks. The best part is it took about 10 minutes to make it. Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Sagebrush Steve Posted February 27, 2018 Share Posted February 27, 2018 1 hour ago, Ptychodus04 said: Thanks. The best part is it took about 10 minutes to make it. Woe is me! I'm trying to save up enough money to buy an air abrasive system and now I have to add a welding system to the list, too. But it I have to admit that stand looks really nice. Something like that would work well for the Priscacara slab I am prepping. Link to comment Share on other sites More sharing options...
Ptychodus04 Posted February 27, 2018 Share Posted February 27, 2018 1 hour ago, Sagebrush Steve said: Woe is me! I'm trying to save up enough money to buy an air abrasive system and now I have to add a welding system to the list, too. But it I have to admit that stand looks really nice. Something like that would work well for the Priscacara slab I am prepping. That's just the beginning. Depending on the scale of mount, I have a large arc welder, a wire feed welder, oxy-acetylene torch, and a propane forge. All of which I have employed in mount fabrication. 1 Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
JohnBrewer Posted February 27, 2018 Share Posted February 27, 2018 1 hour ago, Ptychodus04 said: That's just the beginning. Depending on the scale of mount, I have a large arc welder, a wire feed welder, oxy-acetylene torch, and a propane forge. All of which I have employed in mount fabrication. Might have a go myself. I have a MIG. John Map of UK fossil sites Link to comment Share on other sites More sharing options...
AlaskaNick Posted February 27, 2018 Author Share Posted February 27, 2018 You guys are great, thanks for all the tips and advice. I don't think I'll be doing my own welding anytime soon, but you guys have given me a lot of good ideas- thank you! Link to comment Share on other sites More sharing options...
Ptychodus04 Posted February 28, 2018 Share Posted February 28, 2018 4 hours ago, JohnBrewer said: Might have a go myself. I have a MIG. Do it! It’s fun. Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Bobby Rico Posted January 29, 2019 Share Posted January 29, 2019 On 27/02/2018 at 3:31 PM, Ptychodus04 said: Do you have access to an oxy-acetylene torch? I made some stands for some ammonites this weekend. Angle iron and steel rod from Home Depot. I simply brazed them together, bent with pliers, and painted black. The options are only limited by your imagination (and maybe your welding skills). I am very late to this thread but this stand is really beautiful in it simplistic design and your ammonite looks stunning. I have been think about doing a post “show us your handmade stands.” Because there are so many members coming up with great display ideas and I think to have a verity of ideas in one thread would be useful for members. Link to comment Share on other sites More sharing options...
TyBoy Posted January 29, 2019 Share Posted January 29, 2019 Had not see this post, its very cool stand @Ptychodus04. I like the stand because the fossil is the what the eye focuses on and not the stand. Its the centerpiece. There is also a flat area where an ID label can be placed. Link to comment Share on other sites More sharing options...
caldigger Posted January 30, 2019 Share Posted January 30, 2019 32 minutes ago, TyBoy said: There is also a flat area where an ID label can be placed. Ding, ding, ding, bonus points!!! Stand looks great Kris. Link to comment Share on other sites More sharing options...
Ptychodus04 Posted January 30, 2019 Share Posted January 30, 2019 Thanks all. The flat space for an ID card on the stand was one of the requirements for the stand from the client. I made several for them. 2 Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now