Bone guy Posted July 31, 2018 Share Posted July 31, 2018 I need some advice here. It's been a dream of mine to have a xiphactinus jaw, and here I have two. They are both dentaries: right and left side. (Let me say I will not be purchasing these for probably a good few years.) I wanted to know if it's possible to separate them and remount them to make an inflated lower jaw? I would probably have to send them out to have a professional do it because I have a feeling this is a job for the masters. Link to comment Share on other sites More sharing options...
Ptychodus04 Posted July 31, 2018 Share Posted July 31, 2018 The short answer is maybe... they should be able to separate but there are qualifiers. I’ve removed some really thin bones from on top of others but the preparator has to have some room to work. For large, wide bones such as these, it is hard to safely separate if there’s little to no matrix between them. If the matrix is relatively soft, the job isn’t too awfully hard. I scribe away as much as possible then use a long carbide rod to dig out further. Once you get enough removed, the bone will typically “pop” off the other. After all this, the mount is nothing! Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Bone guy Posted July 31, 2018 Author Share Posted July 31, 2018 43 minutes ago, Ptychodus04 said: The short answer is maybe... they should be able to separate but there are qualifiers. I’ve removed some really thin bones from on top of others but the preparator has to have some room to work. For large, wide bones such as these, it is hard to safely separate if there’s little to no matrix between them. If the matrix is relatively soft, the job isn’t too awfully hard. I scribe away as much as possible then use a long carbide rod to dig out further. Once you get enough removed, the bone will typically “pop” off the other. After all this, the mount is nothing! Cool thanks for the response! I can probably get the seller to give me pictures of the top and bottom of the specimen.....so you could see if there is any matrix in between the jaws. Again, probably will be years before I can get something like this (ain't cheap ). Link to comment Share on other sites More sharing options...
snolly50 Posted July 31, 2018 Share Posted July 31, 2018 One inquiry which may have considerable import - Has the piece been consolidated? If so, how so? A soaking that allowed the thin void between the halves to fill might seriously complicate an effort at separating the twins. If that scenario applied, I suppose a total dunk in acetone might prove salutary. However, mechanical efforts may encounter problematic conditions if the halves are "glued" together. Human beings, who are almost unique in having the ability to learn from the experience of others, also are remarkable for their apparent disinclination to do so. - Douglas Adams, Last Chance to See Link to comment Share on other sites More sharing options...
Bone guy Posted July 31, 2018 Author Share Posted July 31, 2018 3 minutes ago, snolly50 said: One inquiry which may have considerable import - Has the piece been consolidated? If so, how so? A soaking that allowed the thin void between the halves to fill might seriously complicate an effort at separating the twins. If that scenario applied, I suppose a total dunk in acetone might prove salutary. However, mechanical efforts may encounter problematic conditions if the halves are "glued" together. You have a point. Im not sure if the piece has been consolidated I will have to ask the seller. As for the pieces being glued together I think they were compressed together by geological pressure but again I will ask the seller about this. Link to comment Share on other sites More sharing options...
snolly50 Posted July 31, 2018 Share Posted July 31, 2018 9 minutes ago, Bone guy said: As for the pieces being glued together I think they were compressed together by geological pressure but again I will ask the seller about this. Sorry, I wasn't clear. I meant "glued" by the consolidant, if it was applied. If the piece was consolidated by soaking, the plastic would have penetrated the space between the halves. If it was just brushed on the surface, then it should not impact any effort to separate. Human beings, who are almost unique in having the ability to learn from the experience of others, also are remarkable for their apparent disinclination to do so. - Douglas Adams, Last Chance to See Link to comment Share on other sites More sharing options...
Bone guy Posted July 31, 2018 Author Share Posted July 31, 2018 8 hours ago, snolly50 said: Sorry, I wasn't clear. I meant "glued" by the consolidant, if it was applied. If the piece was consolidated by soaking, the plastic would have penetrated the space between the halves. If it was just brushed on the surface, then it should not impact any effort to separate. Ok now I understand. Link to comment Share on other sites More sharing options...
RJB Posted July 31, 2018 Share Posted July 31, 2018 Wow! Nice fossil. and what scary question mark for seperating these! Would love to see and hear the entire prep story if you do decide to purchace this. RB Link to comment Share on other sites More sharing options...
Ptychodus04 Posted August 1, 2018 Share Posted August 1, 2018 Another factor that can complicate this is distortion. If there’s little to no matrix between the two, geologic pressure will deform the bones to the point that they fit together like 2 puzzle pieces. This increases the surface area that the two have in contact with each other, increasing the likelihood that one or both will break during separation. The plus to all of this is that a good preparator is also a good repairman! (or woman). Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
caldigger Posted August 1, 2018 Share Posted August 1, 2018 47 minutes ago, Ptychodus04 said: The plus to all of this is that a good preparator is also a good repairman! (or woman). We'll just call it "Repairperson" for now. Link to comment Share on other sites More sharing options...
TyBoy Posted August 1, 2018 Share Posted August 1, 2018 I would leave it as is. I think they look great without risking breaking them. Together they are a better story Link to comment Share on other sites More sharing options...
Bone guy Posted August 1, 2018 Author Share Posted August 1, 2018 I think @TyBoy has a valid point. It's not smart to risk breakage like that. Plus they do kinda look cool together. Link to comment Share on other sites More sharing options...
Bone guy Posted August 1, 2018 Author Share Posted August 1, 2018 Plus I'm kinda liking this one more. It's a few hundred bucks cheaper, a couple inches longer, and it really conveys that classic bulldog look xiphactinus is so well known for. Thanks for all the advice guys. I hope others can read this thread and learn from it. Link to comment Share on other sites More sharing options...
Troodon Posted August 1, 2018 Share Posted August 1, 2018 Thats a nice one are the front teeth orginal? I like the pair just unusual and cool looking. I would also not separate them indeed a much better story. Purchase both you need uppers and lowers Link to comment Share on other sites More sharing options...
Bone guy Posted August 1, 2018 Author Share Posted August 1, 2018 13 minutes ago, Troodon said: Thats a nice one are the front teeth orginal? I like the pair just unusual and cool looking. I would also not separate them indeed a much better story. Purchase both you need uppers and lowers Yessir front teeth are original. Close up photos reveal some feeding wear! not sure about purchasing both, would take a big bite (haha) out of my savings Link to comment Share on other sites More sharing options...
Ptychodus04 Posted August 1, 2018 Share Posted August 1, 2018 8 minutes ago, Troodon said: Thats a nice one are the front teeth orginal? I like the pair just unusual and cool looking. I would also not separate them indeed a much better story. Purchase both you need uppers and lowers That's right! All he needs is a right maxilla! Once upon a time, I had the opportunity to prep/restore/mount a full set of X. jaws. That was awesome! Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Troodon Posted August 1, 2018 Share Posted August 1, 2018 10 minutes ago, Bone guy said: not sure about purchasing both, would take a big bite (haha) out of my savings Yes but what more important food/roof or a set of extraordinary fossils..that a slam dunk answer.. Link to comment Share on other sites More sharing options...
Troodon Posted August 1, 2018 Share Posted August 1, 2018 6 minutes ago, Ptychodus04 said: That's right! All he needs is a right maxilla! Once upon a time, I had the opportunity to prep/restore/mount a full set of X. jaws. That was awesome! That would be very cool Link to comment Share on other sites More sharing options...
Ptychodus04 Posted August 1, 2018 Share Posted August 1, 2018 2 hours ago, Troodon said: That would be very cool Sadly, the photos were apparently lost in a hard drive crash a few years ago. It was a cool display for sure. Regards, Kris Global Paleo Services, LLC https://globalpaleoservices.com http://instagram.com/globalpaleoservices http://instagram.com/kris.howe Link to comment Share on other sites More sharing options...
Xiphactinus Posted August 1, 2018 Share Posted August 1, 2018 I would not separate them. As Ptychodus said, they are smashed together so much that there will be some distortion. They most likely won't look right if you try to articulate them. Also, those teeth tend to be VERY fragile. You would undoubtedly pop some off. I was lucky enough to find a completely disarticulated skull that I put together 3D. It didn't have any teeth in the dentaries. That's about the only way that will work. Not a great photo, but you get the idea.... Link to comment Share on other sites More sharing options...
Bone guy Posted August 1, 2018 Author Share Posted August 1, 2018 51 minutes ago, Xiphactinus said: I would not separate them. As Ptychodus said, they are smashed together so much that there will be some distortion. They most likely won't look right if you try to articulate them. Also, those teeth tend to be VERY fragile. You would undoubtedly pop some off. I was lucky enough to find a completely disarticulated skull that I put together 3D. It didn't have any teeth in the dentaries. That's about the only way that will work. Thanks for your input! And that skull is awesome Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.