Search the Community
Showing results for tags 'yorkshire'.
-
Hi, I found this on the bottom of a slab on a dry river bed whilst walking in the Yorkshire dales yesterday. Can anyone help identify if it is a fossil and if it’s if any interest? The slab is quite big, perhaps about 1 metre or abit less.
-
Hi there, I’d like to get the expert opinion of you all. Could these be pterosaur ribs? i just know they’re from Whitney, Yorkshire. As you can see, they’re hollow, and all I know of, that would have little hollow ribs like that are pterosaurs, and avian dinosaurs, but I'd imagine it was very uncommon for articulated ribs from a raptor to make it to, and “survive” an aquatic deposit, intact and untouched, although I know pterosaur bones are sometimes found in aquatic fossil deposits, at least from coastal areas. I'm not sure what else would be found there with hollow ribs, and these also seem like maybe they’re too long for ribs of that size/width, so I'm at a total loss now, and wanted to ask for help in figuring out what these could be from. I'm also interested in what the large flat bone might be, and any others too, of course, if anyone can recognize what it/they might be.
-
A recent trip which i found a beautiful cannon ball full of ammonites inside. It's my best one so far.
- 1 reply
-
- 9
-
-
- ammonite
- cannon ball
- (and 1 more)
-
Hi all, I picked up this conical object (I'm currently reluctant to even commit to 'fossil') from the shore at Port Mulgrave, North Yorkshire. It was loose on the shore so unfortunately no certain stratigraphy either. I'd be happy with any thoughts or ideas of what it could be. Thank you all so much in advance, MarineBio
-
So this is the first prep I've attempted with my new Dremel (with specialised tips for fossils/rocks). The ammonite is from Saltwick Bay in Yorkshire. I chose this as my first practice piece as I thought that it was going to be pretty bashed up inside so would be a good one to say 'oh well' if/when I make mistakes. Sadly I now think it could have been quite nice had I saved it for when I have more experience! Anyway, to my inexperienced touch the matrix felt very sticky, with practically none of the matrix popping off nicely. I felt like I was having to carve out the ammonite and there are several spots where you can see I got it wrong and really messed up. My question is, do you think I should go any further? I think the centre may just be present and there are still bits of matrix clinging to some of the ribs but I don't want to do anymore damage and it's too hard to get off with a pin vice (I tried). If you have any advice on prepping matrix like this and any good techniques particularly with ammonites I would really appreciate it. As found In progress... Where I've got to now... Close up of the centre (taken with phone camera through x10 loupe) Forgot to add, this is actually a double with another ammonite on the back
-
I found this on the port mulgrave coast of yorkshire. It is Jurassic What could it be?? 19cm long and 2.5cm across Patrick
-
Hello, I found these pieces a few weeks ago at Saltwick Bay in Yorkshire. The first one is obviously bone and I assume its ichthyosaur, but bone isn't really my forte so I hope that someone else may be able to confirm this or provide an ID. It also has a kind of stone cap on the flat end, anyone got ideas on how to remove that? The second piece I'm not too sure about. The shape is suggestive to me and there are bits that seem somewhat bony in texture, but as I said, I'm not sure. Thanks
-
Hi guys, I’ve done a bit of prepping of this ammonite I found in Salwick Bay, Yorkshire a few weeks ago and have no idea what it is. There are two obvious tubercles and there may have been more but as you can see it isn’t in great shape..
-
Yorkshire's "largest ever dinosaur print" discovered on coast
Oxytropidoceras posted a topic in Fossil News
Yorkshire's 'largest ever dinosaur print' discovered on coast BBC News, BBCYorkshire, April 13, 2021 Yours, Paul H.-
- 3
-
-
- jurassic
- megalosaurus
- (and 3 more)
-
Hi I visited the Yorkshire coast and found several different ammonites, doe anyone here have an ID for them?
-
Found near Whitby, Yorkshire in early Jurassic rock. Could just be a Gryphaea but I thought the curve looked a bit suspicious, like it was a more elongated structure, so figured it was worth checking. Thanks in advance.
.thumb.jpeg.0a5d8babe63099072a9ad2a66af5fcfa.jpeg)
.thumb.jpeg.042d17b7e877cc59e3e64799a1acac86.jpeg)
-
After a few months of many acid baths and manual prep, I finished this quality piece off this afternoon. Most likely heavily predated by another marine reptile. There’s verts, neural arches, ribs, teeth and jaw. Probably around 30 hours of prep in total. Finally have an abrasion unit on its way so all that’s left is to finish the matrix. This is my first foray into proper bone prep, only really doing smaller pieces before, and needed a challenge during this lockdown I’m the uk. Pretty happy with how it’s come out.
- 19 replies
-
- 10
-
-
- bone
- marinereptile
- (and 2 more)
-
Hi, This is my first reptile skeletal find, and I'm absolutely thrilled, especially since I didn't expect to find much at the end of the summer. It's from between staithes and mulgrave. I know they're vertebrae X2, however I'm not sure what exactly. They're also in amongst what could be other bits of bone, the top bit looks like some hard outer exoskeleton (scales/shell?) Although it could equally just be the mudstone concretion. Any ideas?
-
An absolute monster of a jaw section I recently prepped from the Yorkshire coast. Only a partial so shows how big it would have been. This is actually part of another block I’m currently working on, containing another section of jaw along with a tonne of other bone from the beast. There’s also a neural arch from a vertebrae sat in there too. The bigger block is not far off finished so I will post that once acid treatment is finished. Thanks for looking
-
Hi guys. It's been a while as always when it comes to posting on here. Plenty of reason, too long to go into. I hope everybody is doing as well as they can be during this pandemic. Now onto the good stuff. A while back, I posted my phylloceras in a sorry state of affairs, sections missing everywhere, cracks everywhere. Basically it didn't look fantastic. You'll be able to find it somewhere on here from previous posts. Well, lockdown happened here in the uk, which means there was only one thing to do during this time, and that was to get to work in the workshop and finish a lot of stuff. This was was number one priority as I had been putting it off for so long. And here it is All the cracks we're filled in and painted up, there is a small section on the bottom that has been done and finished since I took this photo. There was a section of the outer whorl that had blown out and was none existent, and replaced by shale, probably some form of gas build up happened inside it and blew it out and destroying it. I then had to make a choice of rebuilding it, or figuring something else out. I decided to go against rebuilding, due to lack of experience and the fact it was such a large section, it probably wouldn't have looked quite right. Luckily, I have plenty of dactylioceras specimens of all shapes and sizes, and decided to filll the section with these, you do find these ammonites washed into the mouth borders of pyllos, so iv stuck with what would be there. I don't even know how many hours went into this any more, but it was a lot, and its definitely something that has forced me to improve as a preperator. I'm currently building a metal stand for it, as it weighs a fair amount and no plastic stand will hold it. It now finally sits proudly in my collection and probably always will I hope you all enjoy my work, and i'll be posting more regularly from now on due to a second lockdown in the uk. I actually have a rather large crocodile block i'm working on currently, including a rostrum, vertebrae ribs, teeth etc, theres a lot going on and it'll probably take a long time to complete due to the size and the fact that the majority of the work will involve using acid to remove everythign, either way, it'll certainly be a stunning piece once complete. Oh, and a rather large icthyosaur block measuring over two foot. (yes i have my work cut out for me haha) Thanks. Dan
-
Here's a recent fossil hunt that I recorded, feel free to watch it if you're interested. There is an added bonus of a sunrise too
-
Here is an early morning fossil hunt. I always prefer the early mornings because often I get the beach to myself. Hopefully you enjoy if you want to watch
-
From the album: Cephalopods Worldwide
6.5cm. From the Whitby Mudstone Formation, bifrons Zone, braunianus Subzone of the lower Toarcian at Saltwick Bay, Yorkshire. -
I found this in the South Yorkshire coalfield (UK) recently (upper Carboniferous). I'm 99% sure its a millipede section but would like some second opinions. I suspect this can't be identified to a genus level but if anyone can narrow down the possibilities that would be great, if it is indeed a millipede. Sorry for the lack of a scale, the camera wouldn't focus on the fossil when there was a ruler. It measures 1cm wide. Thanks, Daniel
- 2 replies
-
- 3
-
-
- carboniferous
- millipede
- (and 1 more)
-
Here is a video i just uploaded of some of my very recent finds from the Yorkshire Coast. These finds are all unprepared currently and in the video showed as found. They will be completed very soon and should come out lovely The best finds are the articulated string of verts, and very nice looking section of Ichthyosaur Paddle. Hopefully you enjoy.
-
I've been looking at my specimens of Acrocoelites trisulculosus from the Toarcian Jet Rock (Mulgrave Shale Member = Falciferum Zone) of the north Yorkshire coast. This is an anoxic mudstone deposited during a prominent worldwide Ocean Anoxic Event (OAE) and, as might be expected, the preservation is very good. A number of them (7 so far) have a thin pyrite layer around the apex. This shows obvious lineation in all of them, mostly oblique to the axis of the rostrum. As pyrite is often associated with soft tissue decay, I strongly suspect that this is preserving muscle texture. The texture is similar to that preserved in some other coleoids (e.g. from Solnhofen). Has anyone else seen this? Comments welcome! EDIT: I may be wrong about the soft preservation - a few well preserved specimens from other localities (though not from here) show similar texture on the calcite. Most belemnites look smooth though. (Comments and photos further down this thread) Just two of the specimens here: No. 1: No. 2: left lateral (with divided dorso-lateral furrow - a little unusual) right lateral
- 18 replies
-
- 9
-
-
- acrocoelites
- belemnite
- (and 5 more)
-
Hello Everyone, I found this eroded partial nodule while on a fossil hunt at Runswick Bay last year. I think it contains part of a fish but I'm not sure of the type. I've had a look at some other Yorkshire fish material, primarily Gyrosteus, but haven't seen anything like it yet. Most of the Gyrosteus material seems to be much bigger then whats in this block. I was wondering if anyone could help me identify what it is, I think I have sections of fin as well as possibly a cluster of ribs eroding out of the block. I've also included an annotated image of the front and back since the material is very difficult to pick out in pictures. I'm sure I have missed a few bits but I drew in everything I can see. Also, is there any way to prep this sort of material? The block is full of calcite veining so I assume manual preparation is near impossible, certainly well beyond my beginner abilities. Any and all information you can give me is greatly appreciated. Thank you, Benton
-
Hello everyone, So I’ve had an account for a little while now but haven’t done much yet and I never introduced myself so here goes. I’m Benton, amateur fossil enthusiast from around Seattle. My background so far is in archaeology and I’m currently working on my master’s degree in Human Evolution, but my primary passion is fossils and hopefully they will become my PhD. I study in the UK so most of my fossil collection comes from the Yorkshire coast, including my prised dinosaur footprint, but I have an ever-growing collection from everywhere I go and am learning to prepare some. My primary fossil passions are with early life of the Cambrian and Ediacaran (I’ll have to share my Burgess story soon) and pterosaurs, but this is by no means the full extent of my fascination. I also love fossil endocasts (but haven’t found one yet) and am hoping to study the brains of pterosaurs for my PhD. Some of my favourite specimens form my collection so far, The aforementioned dinosaur footprint A knightia mass mortality slab found last summer A hybodont shark spine from Aust which I hope to prep soon A small flower from Clarkia (my photo) which I don’t know the genus for yet Thank you all for having me and for your input into how to keep my rocks from falling apart. Benton
-
Here are some photos of a geology site near to where I live. The cliff is of the Thornhill rock formation (upper Carboniferous). It was formed in a meandering river channel. I haven’t seen any fossils in the sandstones, but there are some very poorly preserved plant remains in the siltstones. Most of the fossils I find in the coal measures are from coal tips, so even though this isn’t a fossil site, I enjoy visiting here to see the geology.
- 3 replies
-
- 3
-
-
- carboniferous
- geology
- (and 1 more)
-
I found this fossil today when splitting upper Carboniferous nodules I found earlier this year in West Yorkshire, UK. I can’t decide whether this is a Cyclopteris leaf or an insect wing. I think Cyclopteris leaf is more likely but I’m not sure. It measures 2.5cm long. Does anyone know what this is? Thanks, Daniel
.thumb.jpg.76796f25a72f97c9c2a87f953ebe4dca.jpg)
.jpeg.928cff876f52cffe1652c7afbcae23e6.jpeg)
.jpeg.6e02df0ee4e0dadd2cea9a19de112a22.jpeg)
