Jump to content

Homemade Hammer Holder


Mike from North Queensland

Recommended Posts

As I have never found a hammer holder that I liked in the tool shops as they usually dig in to your hip or close when you try to put the hammer back.

So about 20 years ago I started making my own based on one another tradesman had made for himself.

All you need is a few basic tools and bits and pieces.

 

 

* A short piece of 50 mm PVC pipe 100 mm long.

* A 3 mm and a 10 mm drill bit.

* sand paper and or a file.

* Drill and jigsaw or hacksaw

* Optional - Heat gun

 

1 - First download the attached instructions and print to an A4 page - (standard printer page)

2 - Use instructions on page.

3 - Use photos attached for reference.

4 - Use when fossicking 

 

 

Mike

 

1 Hammer Holder instructions.jpg

2 Cut out template.jpg

3 Mark out on 50 mm pipe and drill holes.jpg

4 cut out holders.jpg

5 Sand edges smooth.jpg

6 flatten inner side.JPG

7 Finished 2.jpg

Link to comment
Share on other sites

Great tutorial, Mike!  :) 

Thanks for posting it. 

    Tim    VETERAN SHALE SPLITTER

   MOTM.png.61350469b02f439fd4d5d77c2c69da85.png      PaleoPartner.png.30c01982e09b0cc0b7d9d6a7a21f56c6.png.a600039856933851eeea617ca3f2d15f.png     Postmaster1.jpg.900efa599049929531fa81981f028e24.jpg    VFOTM.png.f1b09c78bf88298b009b0da14ef44cf0.png  VFOTM APRIL - 2015  

__________________________________________________
"In every walk with nature one receives far more than he seeks."
John Muir ~ ~ ~ ~   ><))))( *>  About Me      

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...