Search the Community
Showing results for tags 'mosasaur'.
-
Finally made a trip to the North Sulphur River. As a first timer, I went straight to the Ladonia Fossil Park. It has a large parking area with clear access to the river bottom. Keep in mind, the access is good, but the steps are HUGE. Going down isn't too difficult, but getting back up had me climbing them on my hands/knees. There is an ATV trail on the east side of the bridge that I was told has a more gradual slope, but you'll need to keep an eye open for snakes/insects, as its heavily overgrown with vegetation. I had a great time searching the river bed and banks for fossils. I found tons of baculite segments and lots of vertabrate bone fragments (likely mosasaur). Very few well preserved specimens with the majority worn beyond identification. Also found a few oyster shells, gastropods, and shark teeth. Tools aren't necessary, but you may want to carry scraping tool or a small pry bar for working the bank exposures. Screen boxes also come in handy for sifting through sediments in the river bed. A few words to the wise: - during spring/summer, be sure to wear sunscreen and stay hydrated - use a walking stick to steady yourself and for testing areas ahead of your walk path - try to stay on gravel bars, as the mud can be deep especially along edge of the banks - when walking through water between gravel bars try to avoid walking on shale layers as it is extremely slippery - be aware that there is lots of broken glass, concrete rubble, rusty metal, and other debris - for the above reasons and the fact that they are not very supportive, I would strongly advise against flip flops with firsthand knowledge (in the words of Jimmy Buffet, "I blew out my flip flop, stepped on a pop top........." ) And lastly, always check the water level of the river before making the trek - go to the National Weather Service for North Sulphur River near Cooper, TX (Gauge CPPT2) https://water.weather.gov/ahps2/hydrograph.php?wfo=fwd&gage=cppt2&hydro_type=0 I can't wait to go back.
- 2 replies
-
- 3
-
- baculites
- ladonia fossil park
-
(and 3 more)
Tagged with:
-
Found this perfectly split in half tooth that shows the root structure, the shape seems to be mosasaur but not sure. Any thoughts or ideas??
- 5 replies
-
- big brook
- cretaceous
-
(and 3 more)
Tagged with:
-
Juvenile Mosasaur Tooth from Ramanessin Brook
Jeffrey P posted a gallery image in Member Collections
From the album: Cretaceous
Juvenile Mosasaur Tooth Upper Cretaceous Wenonah Formation Matawan Group Ramanessin Brook Holmdel, N.J.- 1 comment
-
- 1
-
- cretaceous
- matawan group
-
(and 3 more)
Tagged with:
-
Hi! After a long hiatus from fossil collecting, I've finally decided to start again! While searching online, I found this amazing specimen on online listed as a Mosasaur skull- I'm sure anyone could debunk that in seconds. I'm almost certain that this is actually the skull of a crocodile, but I want to be sure before I go ahead and purchase it. I'm also unsure of the authenticity of this fossil- for the cheap price it is at currently, it is a complete steal. Any input is appreciated. -conleys
-
Question about Mosasaur tooth
Savvas posted a topic in Is It Real? How to Recognize Fossil Fabrications
Hello everyone, my name is Savvas and I am new to this forum, I am a collector of ancient coins for years and just yesterday I got my first fossil (trilobite) and I am really excited! My question is about a tooth of a mosasaur I found in the same store in my town that I got the one that bought yesterday, a good store for science gadgets and things like that, that sells some fossils but it is not their speciality. I have read some things about the teeth and know that the crowns are most commonly original, butmany times the matrix and the root is faked for artistic purposes, so the one at the store is a tooth not very big nor small, inside a matrix and has a root too, the root is small, the price is 40 euros. So I understand that without seeing it you can'treally tell, but can you please help me understand what are the signs of a fake one and of a real one so when I will go there to buy it to know what I see. I would really appreciate your help on this matter. Thank you kindly for all your help! -
From the album: Cartier's favoroite fossils
-
Mosasaur vertebra - North Sulphur River
Texas Fossil Hound posted a gallery image in Member Collections
From the album: Cartier's favoroite fossils
-
Hello! I have two fossils I found in Monmouth County, NJ, I would like to get some opinions on. The first one looks a lot like my other Mosasaur Verts (concave on one side, convex on the other, size and shape look right) however, it has that divot on one side so I was wondering if that could throw croc into play. The second one, which I believe to be reptile bone, has those four equally spaced lines on it so I want to know if we think they are predatory/scavenge marks. I know that's usually tough to tell but that spacing between them looked pretty good to me. As always, all help is greatly appreciated! -Frank H
-
Please help identity. Is this a mosasaur or something else? This tooth was found of the WM Browning Cretaceous Fossil park. This is shaped somewhat different than other mosasaur that I have found at the park (more slender and recurved). For example, this looks much different than the pterygoid tooth in my collection. Thanks for your insight.
- 14 replies
-
- 1
-
- cretaceous
- frankstown
-
(and 2 more)
Tagged with:
-
From the album: North Sulphur River Texas
-
- 14 replies
-
- 8
-
- corprolite
- jaw
- (and 4 more)
-
Fun day on the North Sulphur River Texas. We saw some cool wildlife. Here's my finds. A nice mix of pleisosaur, mosasaur, enchodus, shark, turtle, horse, coprolite and artifacts.
-
Hi my name is Dan and I periodically go down in the central and southern NJ to look for fossils. I have collected at Big Brook and Ramanessin a number of times but am looking to expand my list of sites! Any help would be appreciated! (I found my way here from the FB group)
- 19 replies
-
- 1
-
- big brook
- cretaceous
- (and 6 more)
-
Purchased from online. Morocco fossil. Are they Mosasaur, Plesiosaur, Spinosaur or other species? Need help for ID, Thanks!
-
NJ Cretacous hunt today, found this tooth in a deep sift. Has a tiny bit of enamel left on it. Any ideas? Its about 1-1/2 inches long.
- 9 replies
-
- crocodilian
- mosasaur
-
(and 1 more)
Tagged with:
-
I have this piece, which sadly I do not know much about, being that it was acquired at an estate sale and had no info. I have not been able to find something similar looking online, except for maybe a small section of teeth from a helicoprionid shark? The piece is about 6 x 7" and the teeth(?) are about 1/2" in length.
- 3 replies
-
- helicoprionid shark
- mosasaur
-
(and 2 more)
Tagged with:
-
Been a long time, finally got out for a bit and found my 3rd Plesiosaur vert along with some others. Also the first snake encounter of the season. This guy was only a few feet long. 49 degrees with 20 mph winds. Warmer days ahead! Late Cretaceous 80 mya
- 13 replies
-
- 6
-
- mosasaur
- plesiosaur
-
(and 1 more)
Tagged with:
-
Laying thick in the mud after a torrential rain. I'm certainly not proficient but was thinking Mosasaur tooth with root? Any ideas?
- 8 replies
-
- big brook
- cretaceous
-
(and 3 more)
Tagged with:
-
Hey everyone! So, I have recently acquired some fossils and, forever the skeptic and pessimist, I just want to see if they're (likely to be) real or not. Spinosaurus Tooth (Egypt) - Unknown Pterosaur Bone (Unknown) - Mosasaur Teeth (Morocco) - I'm very aware of the fake jaw aspect, I'm just interested in whether or not the teeth are real. Thank you!
-
I had a fun hike at the North Sulphur River Texas yesterday. I figured it would be picked over but I found a pretty remote spot with my 4x4. The one sawfish tooth I found in a small creek a few days before. Everything else is from yesterday. It was a great day for Cretaceous coprolite (Poo). @GeschWhat The one coprolite is full of fish verts, bones and fins.
-
So recently my father bought a 3D printer and we've been experimenting printing some cool fossils for a while now. It's a really cool technology. Though it can take a while to print a piece the results are really quite cool. A life size Archaeopteryx can take a few days to print if you don't keep printing during the night. Finishing up the prints afterwards can also take a bit of time. Cleaning off all the supports and sanding down rough surfaces can be quite the process. Then there's painting depending on the desired result of course. There are actually a lot of nice things that can be found for download on the internet. Though many of these models still require a bit of digital cleanup before they could be printed. So here are a number of the painted, unpainted and half painted results. Most of the printed stuff is dinosaur. Photo of the 3D printer and the just finished print of a juvenile Edmontosaurus lower jaw. And here's the same Edmontosaurus jaw print half painted again with the real fossil in mirror image next to it. I scanned the original bone that I then mirrored digitaly so that I could print out the other side of the jaw. Allosaurus hand claw. Clidastes Mosasaur quadrate bone. Skull of the "Prosauropod" Massospondylus. Holotype right lower jaw of Owenodon hoggi, an Iguanodontid. Download link: https://sketchfab.com/3d-models/iguanodon-jawbone-f016ad38ebb647988dafd6bbdc1510d0 1/5th scale Nanotyrannus lancensis skull. The Cleveland specimen. Download link for original file: https://sketchfab.com/3d-models/nanotyrannus-lancensis-young-t-rex-7b0967fa27674d959647868686b6717b One of my favourites. The Eichstatt Archaeopteryx specimen. Download link for original file: https://sketchfab.com/3d-models/eichstatt-archaeopteryx-b71872ad42794ef7883021f2fa9a8079 The right side skeleton of the baby Parasaurolophus "Joe". Printed at 1/5th scale. Right humerus and pedal phalanges printed at life size. Most of the fossil prints are for my collection. But my dad also wanted a few cool things which I painted for him. Skulls of Dodo and Australopithecus Taung Child. Download link for Dodo original file: https://sketchfab.com/3d-models/dodo-264b7746a42b41b2845a499de16f8538 Most are painted roughly to look like their real counter parts.
- 33 replies
-
- 10
-
While collecting at a location in SE Virginia which produces a mixture of material from the Eocene Nanjemoy Formation and late Miocene/early Pliocene Yorktown Formation, I was shocked to find what I believe to be a cretaceous Globidens sp. anterior tooth fragment. My only explanation for this would be that it must have been redeposited into the Eocene beds and finally exposed with rest of the material. The texture is classic Globidens. The only other species with a slightly similar texture found within these formations (though still markedly different), would be Squalodon sp., however if the tooth were more complete it would clearly prove to be hollow with a conical interior consistent with squamates like mosasaurs. The fragment is approximately 7/8" x 1/2". This is the first bit of possibly cretaceous material I have found from these exposures, so it would be quite interesting if the general consensus is a Globidens sp. Your thoughts would be much appreciated! Thanks, Ash
- 9 replies
-
- cretaceous
- eocene
- (and 8 more)
-
Made it out to the North Sulphur River yesterday and found a couple of interesting pieces of bone. One was a small jawbone that may be mosasaur but may be small enough to be from some type of fish, not sure. The other piece was one of the largest that I have found but is an odd shape and I am not sure if it may be from a mosasaur, most of the material from this area falls into that group? Any thoughts would be appreciated.
-
Found some cool items today - Real or Fake?
Beau'n Collector posted a topic in Is It Real? How to Recognize Fossil Fabrications
Hi everyone! New member here. I am very excited to make my first post. So I came across a vendor today with some cool stuff, but I wanted to run some photos by the forum members first to see: 1) if you think they are real or fake. 2) how much would you expect to pay for a piece like that. Thanks for the help! Item #1 - Mosasaur Jaw To my eyes, this item looks legit as the teeth don't seem to be floating above the jaw with composite all around it, or teeth pointed in different directions. BUT...I know fakes are good and I am relatively new to educating myself to fakes vs real. Item #2 - Another Mosasaur Jaw (top and bottom) Also looks pretty legit to my newb eyes. But I am worried both top and bottom jaws in that position are too good to be true. Item #3 - Croc Skull? My gut reaction is fake...mostly due to the matrix looking like it was smeared on like cream cheese. Item #4 - Plesiosaur Skull and Neck It's apparently from goulmima southern morocco. Sadly I don't have more pics, as I didn't want to handle it and move it around. But I was able to get down low and see that it does have it's teeth. I just couldn't a good picture of it. :-\ The closest comparison I could find was this plesiosaur head/neck from an archived auction house website image. But the matrix around it seems the same.- 10 replies